How Much HP Can A Stock 6.0 LS Handle?

What is the best LS motor to swap?

What engine is best for an LS swap.

In short, the best engine for your LS or Vortec swap is the one you can afford.

Sure, we would all love a shiny new LS3 crate engine from Chevrolet Performance or a rebuilt 5.3L long-block from Summit Racing, but once we crunch the numbers that’s not always possible..

How much horsepower can a stock LS handle?

how much HP a stock LS1 engine can handle? Most people will tell you 500-550 rwhp is a reasonably safe limit to push a stock bottom end.

How much can a 6.0 LS block be bored?

The 6.0L block—used in the LQ4, LQ9, and LY6—is the most popular with hot rodders. It features a 4.000-inch bore and can be purchased brand new for $800. It can safely accommodate a 4.030-inch bore and is good for 421 ci when matched with a 4.125-inch stroke.

Whats better ls1 or ls2?

LS1 vs LS2: Intake One of the main differences between the LS1 and the LS2 is in the intake manifold. The LS2 intake is slightly better than the LS1 intake. … The LS2 intake has a larger opening and larger intake runners. It’s also designed for a 6.0L motor and flows enough air to keep a 400 horsepower 6.0L happy.

How much HP can a ls1 make?

Even in emissions-legal trim, a blown LS1 will pump out over 500 wheel horsepower, with 800 wheel hp available for a serious stroker effort. With turbo motors, the sky is the limit, as 1,000 hp is a common occurrence, with the ability to adjust the power output by turning a simple boost knob.

What LS motor has the most horsepower?

LS7In stock form, an LS7 makes 505 horsepower and 470 pound-feet of torque making it the most powerful naturally aspirated engine that General Motors has ever put in a production car.

How much HP can a 6.0 Chevy make?

So equipped, the Big-Bang 6.0L produced 529 hp at 6,800 rpm and 457 lb-ft of torque at 5,100 rpm.

How much HP does a stroker kit add?

A traditional 4.21/ 6.625/3.0 stroker kit ups the CID to 455 and raises the SCR to around 8.8-9.1:1- with the addition of a high-lift aftermarket cam, upgraded ignition, headers and a larger exhaust, an output of over 375-425 hp is not only possible, but very attainable, even w/ stock heads.

What LS engine is the best?

Best LS EnginesLS9/LSA: Made for the 2009-2013 Corvette ZR1, the LS9 is a supercharged 6.2L engine rated at 638 horsepower — the most powerful of all small blocks. … LS1: This is the one that started it all! … LS7: Introduced in 2005, the LS7 sported 427 cubic inches, making it the largest small block ever.More items…•

Which 6.0 LS is the best?

However, all five can be honed to 3.89-inches to use LS1 or LS6 pistons. If it is a large bore that you crave, the 6.0L blocks (LQ4 and LQ9) are the best of the Gen IIIs. These iron anchors were used in the heavier duty trucks, SUVs, and vans.

Why are LS engines so good?

1. Size/Weight of LS engines. … The main reason that they’re such a compact V8 engine is because of their “old-school” pushrod design, as well as all of the modern designs they used when designing the engine block. The push-rod design that they continue to use is unlike almost all modern engines that have overhead cams.

Is 5.3 and 6.0 the same block?

Flassh, Actually the 6.0 motor is the same small block that the 5.3 utilizes. The 5.3 is 327 cu. in. and the 6.0 is the same block bored to a 366 cu.

What is the best LS block to build?

The most desirable castings are the 6.0L LQ9 or LQ4 truck blocks, which are production cast iron blocks, with 6-bolt iron main bearing caps, 9.240-inch deck height, and offer a 4.00-inch bore.

How much power can a stock lq9 handle?

1,000 hpThe LQ4 and LQ9 have very strong blocks. They can handle over 1,000 hp. using nitrous, a blower, or a turbo.

How much boost can a stock LS take?

About 8 or 9 lbs of boost max on a bone stock ls1.