Question: Can Drywall Be Used In Unheated Garage?

What is the best material for a garage ceiling?

For a basic garage ceiling, drywall is a simple, cheap material option.

It’s easy to nail to existing beams and can also serve as a base for other ceiling materials if you decide to upgrade.

This addition to your garage ceiling, when finished and painted, can go a long way toward giving the space a completed feel..

What is code for garage drywall?

Garages located less than 3 feet (914 mm) from a dwelling unit on the same lot shall be protected with not less than 1/2–inch (12.7 mm) gypsum board applied to the interior side of exterior walls that are within this area.

How can I insulate my garage cheaply?

Fiberglass roll insulation is the cheapest and easiest type to install, provided that your garage’s interior walls have not been constructed. Unroll the insulation between the wall studs with the vapor barrier facing the inside of the garage.

What can I use instead of drywall in garage?

Instead of drywall, consider covering garage walls with cement board panels. These panels make it easy to add tile, or even stone veneer. Using stone veneer over cement board, you can create an exposed brick or natural stone wall in the garage.

Is it OK to use plywood instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

Does it make sense to insulate an unheated garage?

Engineering studies have shown that replacing a non-insulated garage door with an insulated one can reduce heat loss through the garage by more than 70%. Even if your garage is unheated that could mean a garage that’s warmer by as much as 20 degrees Fahrenheit on the coldest Colorado nights.

Should you mold resistant drywall in garage?

One may also ask, do I need mold resistant drywall in garage? Mold/mildew will grow if the moisture is trapped. … You do not need 5/8″ drywall for the garage walls. In the US, you need it between the garage and living space, but not on the exterior walls.

What insulates better drywall or plywood?

Drywall offers superior fire resistance compared to plywood, making it the safer wall finish in most applications. … This typically means covering studs with a 5/8-inch sheet of fire-rated drywall in accordance with the manufacturer’s recommendations. Most plywood cannot be used to meet this requirement.

Does garage need drywall?

If you insulate it, your garage will be warmer – at least, after the door has been closed for a while – and you will lose less heat. It won’t be super-warm, but it will help. You do not need 5/8″ drywall for the garage walls. In the US, you need it between the garage and living space, but not on the exterior walls.

How do I keep my garage warm in the winter?

Stay toasty and warm throughout the chilly season with Garage Heating 101 – our tips to keep your garage warm this winter:Step 1: Clean Up. … Step 2: Replace the Weather-Stripping. … Step 3: Insulate the Walls. … Step 4: Take Care of the Garage Door. … Step 5: Install a Heater.

Which drywall to use in garage?

Drywall is the easiest and most economical covering for your garage ceiling. Use 5/8-in. -thick drywall if your trusses or rafters are spaced 24 in. apart.

Does garage drywall need to be fire rated?

R302. 6 Dwelling/garage fire separation: The wall between a house and garage must be separated by 1/2″ drywall. … If there are habitable rooms above the garage, 5/8″ type X (fire-rated) drywall must be used at the ceiling.

Can I use plywood instead of drywall in my garage?

In areas that have adopted the IBC, you will need to have one layer of 5/8″ Type X drywall mudded and taped between the garage and any living space. You can hang plywood or peg board over that, no problem.

How thick should Plywood be for garage walls?

3/8-inchSecondly, how thick should Plywood be for garage walls? Minimum Plywood Thickness The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing.