Question: Why Is My New Asphalt Driveway Not Smooth?

How do you smooth rough asphalt?

Apply several coats of asphalt sealer, allowing each coat to dry for at least 24 hours before applying the next.

Mix the sealer with a paint stirrer and apply it around the edges of the area.

Push it evenly around the surface using a seal coating squeegee brush..

How do you fix crumbling edges on an asphalt driveway?

If the edge of the driveway is so damaged that part of it is missing, then you may need to add new asphalt to the area to repair it. This might require chipping away the damaged area to create a straight line along the edge. Then, you may need to add gravel and compact it in the same way you would to fill a pothole.

Should a new asphalt driveway be smooth?

Over time, through the process of freezing and thawing, your asphalt is going to break down. You’ll notice cracks appearing on your paving and potholes will start to form as well as dips in your asphalt. So, yes – smooth asphalt is incredibly important!

Can you put new asphalt over old asphalt?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).

Does rain affect new asphalt driveway?

Rain and Asphalt Installation There is no way around it; asphalt cannot be installed when it is raining outside. … In the case that newly-laid asphalt is subjected to rainfall or water, holes and cracks can form, eventually leading to a crumbling mess of potholes and other major pavement damages.

Can you walk on a newly paved driveway?

For a new asphalt driveway, you should wait one or two days to walk or drive on it (depending on how hot the weather is). For resurfaced driveways and parking lots, you should wait two to six hours (depending on the weather) before walking or driving on them.

Why is my new driveway still soft?

In order for driveway to fully harden the Asphalt Cement needs time to cure. … During the first year your new driveway may become soft or tender on very warm days. This is normal, but care should be used on these days.

What causes asphalt to crumble?

Fuel and oil can quickly deteriorate your asphalt pavement surface. … In addition, over time the fuel and oil begin to penetrate the surface and can break up the aggregates of the asphalt. Eventually, the surface may begin to crumble and you may see some depressions begin to form.

Why is my asphalt driveway still soft?

REASON – Asphalt contains certain oils or volatiles to make it more workable or malleable. Until they evaporate, the blacktop will remain soft. This aging or curing process may take as long as a year, depending upon blacktop thickness, weather, etc.

How long do you need to stay off a new asphalt driveway?

24-hoursQ: How long should I stay off the new asphalt? Normally, 24-hours is all that is required to use your new asphalt surface. In very warm weather, we recommend staying off the fresh asphalt for 1 – 2 days, as the surface cools.

How long can asphalt last?

25-30 yearsThe life expectancy varies based on climate, traffic, and maintenance. It is possible to have asphalt pavement last 25-30 years, but this depends on how strong the base is, the soil types underneath, how well those soils drain, how think the original road, parking lot, or drivewaywas paved.